Pickup 4WD L4-144.4 2366cc 2.4L SOHC (22R-E) (1986)
/Page-645001.png)
Transmission Speed Sensor: Testing and Inspection
No. 1 Speed Sensor
INSPECTION OF NO. 1 SPEED SENSOR IN COMBINATION METER (A340H Transmission)
Analog meter:
(a) Remove the combination meter.
(b) Connect an ohmmeter between terminals SPD and GND.
(c) Revolve the meter shaft and check that the meter needle repeatedly deflects from 0 ohms to infinity ohms.
Digital meter
(a) Remove the combination meter.
(b) Connect SST to the combination meter and wire harness.
(c) Check that there is voltage between terminals 4P and E2 which fluctuates between 0 - 1.0 V when meter cable is turned.
(d) If operation is not as specified, replace the sensor.
SST 09082-00100
