Pickup 4WD L4-144.4 2366cc 2.4L SOHC (22R-E) (1986)
/Page-652001.png)
Idler Gear Shaft: Service and Repair
IDLER GEAR
COMPONENTS
...............................................................................................................................................................................................................................................
BEARING REPLACEMENT
1.
IF NECESSARY, REPLACE IDLER GEAR REAR BEARING
(a) Using a snap ring expander, remove the snap ring.
(b) Using a press and 19 mm socket wrench, remove the bearing.
(c) Using SST and a press, press in a new bearing. SST 09316-60010 (09316-00020)
(d) Select a snap ring that will allow minimum axial play and install it on the shaft.
Maximum play: 0.15 mm (0.0059 in.)
