Pickup 4WD L4-2366cc 2.4L SOHC (22R) (1984)
/Page-625006.png)
2. Adjust height of SST.
a. Position SST, place the clutch hub above it and insert the cam follower.
SST 09950-20014
b. Adjust the height of the SST so the cam follower meshes with the inner hub spline and also so the cam follower claw aligns with the claw of
SST.
c. Remove the cam follower.
3. Assemble outer cam, inner cam.
a. Align the inner cam notch with the outer cam claw and insert it.
b. Align the positions of the inner and outer cam.
4. Assemble return spring, cam follower, outer cam with inner cam to inner hub.
a. Install the return spring.
b. Align the cam follower with the outer cam with inner cam and install it to the inner hub.
c. Compress the return spring and attach the cam follower claw to SST.
SST 09950-20014
c. Using snap ring pliers, secure the snap ring.
5. Install clutch, joint spring, preset spring, spring retainer to inner hub.
a. Install the joint spring to the clutch.
b. Install the spring retainer and preset spring to the clutch.
