Pickup 4WD V6-180.5 2959cc 3.0L SOHC (3VZ-E) (1990)
/Page-77001.png)
Evaporator Temperature Sensor / Switch: Testing and Inspection
THERMISTOR ON-VEHICLE INSPECTION
1. Disconnect negative battery cable.
2. Remove glove box.
3. Disconnect connector of thermistor.
4. Check resistance of thermistor.
^
Measure the resistance between terminals.
^
Standard resistance: 1,500 ohms at 25°C (77°F).
^
If resistance is not as specified, replace the thermistor.
