Pickup 4WD V6-180.5 2959cc 3.0L SOHC (3VZ-E) (1990)
4. REMOVE OIL SEAL AND OIL SLINGER
(a) Using SST, remove the oil seal.
SST 09308-10010
(b) Remove the oil slinger.
5. REMOVE REAR BEARING AND BEARING SPACER
(a) Using SST, remove the rear bearing from the drive pinion.
SST 09556-22010
(b) Remove the bearing spacer.
6. INSTALL BEARING SPACER, REAR BEARING AND OIL SLINGER
(a) Install a new bearing spacer.
(b) Install the rear bearing.
(c) Install the oil slinger.
7. INSTALL OIL SEAL
(a) Using SST and a hammer. install a new oil seal.
SST 09554-30011
Oil seal drive in depth: 1.5 mm (0.059 in.)
(b) Apply MP grease to the oil seal lip.