Pickup 4WD V6-180.5 2959cc 3.0L SOHC (3VZ-E) (1990)
2. REMOVE BOLT WITH WASHER
3. REMOVE FREE WHEELING HUB BODY
(a) Remove the mounting nuts and washers.
(b) Using a brass bar and hammer, tap on the bolts head and remove the cone washers.
(c) Pull off the free wheeling hub body.
DISASSEMBLY OF FREE WHEELING HUB
1. REMOVE CONTROL HANDLE FROM FREE WHEELING HUB COVER
(a) Compressing the spring, remove the pawl tab from the handle cam, and remove the clutch.
(b) Using snap ring pliers, remove the snap ring.
(c) Remove the control handle.
(d) Remove the steel ball, spring and seal from the control handle.