toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Bleeding the Brake System|Page 5021 > < Bleeding the Brake System|Page 5019
Page 4
background image

3. RAISE FRONT BRAKE PRESSURE TO FOLLOWING SPECIFICATION AND CHECK REAR BRAKE PRESURE

Rear brake pressure:

Rear drum brake

Rear disc brake:

HINT  The brake pedal should not be depressed twice and/or returned while setting to the specified pressure. Read the value of rear pressure 2
seconds after adjusting the specified fluid pressure.

4. IF NECESSARY, ADJUST FLUID PRESSURE

(a) Adjust the spring shaft length by turning the adjusting nut.

Low pressure-Lengthen A High pressure-Shorten A

HINT:  For every turn of the adjuster, the fluid pressure will change by about:

Rear drum Brake:  196.1 kPa (2.0 kgf/cm2, 28.4 psi) 

Bleeding the Brake System|Page 5021 > < Bleeding the Brake System|Page 5019