toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Load Compensator, Rear Wheel Brakes|Specifications|Page 5152 > < Load Compensator, Rear Wheel Brakes|Specifications|Page 5150
Page 3
background image

Adjust Spring Shaft Length

(a) Adjust the spring shaft length by turning the adjusting nut. 

Low pressure-Lengthen A. 
High pressure-Shorten A. 

NOTE: For every turn of the adjuster, the fluid pressure will change by about: 
Rear Drum Brake: 196.1 kPa (28.4 psi) 
Rear Disc Brake: 382.5 kPa (55.5 psi)

Torque Nut

(b) Torque the nut.

Torque 13 Nm (9 ft. lbs.)

5. Remove LSPV gauge (SST) and bleed brake system. See: Brake Bleeding/Service and Repair
6. Check for leaks.

Load Compensator, Rear Wheel Brakes|Specifications|Page 5152 > < Load Compensator, Rear Wheel Brakes|Specifications|Page 5150