Previa Van LE 4WD L4-2438cc 2.4L DOHC SC MFI (1997)
Cruise Control Actuator: Component Tests and General Diagnostics
1. INSPECT MAGNETIC CLUTCH ACTUATOR
a. Check that the arm moves smoothly by hand.
b. Connect the positive (+) lead from the battery to terminal 5 and the negative (-) lead to terminal 4. (Magnetic clutch turned ON)
c. Check that the arm does not move by hand.
If operation is not as specified, replace the motor.
2. INSPECT ACTUATOR MOTOR
a. With the magnetic clutch ON, connect the positive (+) lead from the battery to terminal 6 and the negative (-) lead to terminal 7, and check that
the arm moves to the open side.
b. When the arm reached to the open position, check that the motor operation stops.
c. With the magnetic clutch ON, connect the positive (+) lead from the battery to terminal 7 and the negative (-) lead to terminal 6, and check that
the arm moves to the close side.
d. When the arm reaches to the closed position, check that the motor operation stops.
3. INSPECT POSITION SENSOR
