toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Cruise Control Switch > < Initial Inspection and Diagnostic Overview|Page 6638
Page 2
background image

a. Measure resistance between terminals 1 and 3.

Resistance: Approx. 2 k ohm

b. When the arm is moving from the closed to open position, check that resistance between terminals 2 and 3 increases from approx. 0.5 to 1.7 k

ohm.

If operation is not as specified, replace the motor.

Cruise Control Switch > < Initial Inspection and Diagnostic Overview|Page 6638