Previa Van LE 4WD L4-2438cc 2.4L DOHC SC MFI (1997)
Drive Belt: Testing and Inspection
A/C
DRIVE BELT TENSION INSPECTION
1. MAKE SURE THAT DRIVE BELT IS INSTALLED CORRECTLY
Check that the drive belt fits properly in the ribbed grooves.
2. INSPECT DRIVE BELT TENSION
Using a belt tension gauge, check the drive belt tension.
Belt tension gauge:
Nippondenso BTG - 20 (95506 - 00020) or
Borroughs No. TB - 33 - 73F
Drive belt tension:
New belt: 165 ± 26 lbf
Used belt: 100 ± 20 lbf
HINT:
-
"New belt" refers to a belt which has been used less than 5 minutes on a running engine.
-
"Used belt" refers to a belt which has used on a running engine for 5 minutes or more.
-
After installing the drive belt, check that it fits properly in the ribbed grooves.
