toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Evaporative Emission Control Canister|Testing and Inspection|Page 3179 > < Vacuum Switching Valve (VSV) for EVAP <--> [Canister Purge Solenoid]|Specifications|Page 3175
Page 1
background image

Evaporative Emission Control Canister: Testing and Inspection

CHARCOAL CANISTER INSPECTION

1. Remove charcoal canister.
2. Remove cap from charcoal canister.

3. Visually inspect charcoal canister.

Look for cracks or damage.

4. Inspect for clogged filter and stuck check valve.

(a) Using low pressure compressed air (4.71 kPa, 48 kg/cm sq., 0.68 psi), blow into tank pipe and check that air flows without resistance from the

other pipes.

(b) Blow air (4.71 kPa, 48 kg/cm sq., 0.68 psi) into purge pipe and check that air does not flow from the other pipes.

If a problem is found, replace the charcoal canister.

Evaporative Emission Control Canister|Testing and Inspection|Page 3179 > < Vacuum Switching Valve (VSV) for EVAP <--> [Canister Purge Solenoid]|Specifications|Page 3175