Previa Van LE 4WD L4-2438cc 2.4L DOHC SC MFI (1997)
Crankshaft Position Sensor: Service and Repair
CRANKSHAFT POSITION SENSOR REMOVAL
1. Remove No.2 engine hanger.
Remove the 4 bolts and engine hanger.
2. Disconnect crankshaft position sensor connector.
3. Remove crankshaft position sensor.
Remove the 2 bolts and crankshaft position sensor.
Torque: 8.5 N.m (85 kgf.cm, 74 in.lbf)
CRANKSHAFT POSITION SENSOR INSTALLATION
INSTALLATION HINT: Installation is in the reverse order of removal.
