Previa Van LE 4WD L4-2438cc 2.4L DOHC SC MFI (1997)
Rectifier Diode / Bridge: Testing and Inspection
Rectifiers (Rectifier Holder)
1. INSPECT POSITIVE RECTIFIER
a. Using an ohmmeter. connect one tester probe to the positive (+) terminal and the other to each rectifier terminal.
b. Reverse the polarity of the tester probes and repeat step (a).
c. Check that one shows continuity and the other shows no continuity.
If continuity is not as specified, replace the rectifier holder.
2. INSPECT NEGATIVE RECTIFIER
a. Using an ohmmeter, connect one tester probe to each negative (-) terminal and the other to each rectifier terminal.
b. Reverse the polarity of the tester probes and repeat step (a).
c. Check that one shows continuity and the other shows no continuity.
If continuity is not as specified, replace the rectifier holder.