Previa Van LE 4WD L4-2438cc 2.4L DOHC SC MFI (1997)
CAUTION: The gas coming out is harmless, but be careful of chips which may fly up when drilling.
ASSEMBLY
1. Install coil spring and suspension support.
a. Install the lower insulator onto the shock absorber.
b. Install the spring bumper to the shock absorber piston rod.
c. Using SST # 09727 - 30021 or equivalent, compress the coil spring.
NOTICE: Do not use an impact wrench. It will damage the SST.
d. Install the coil spring to the shock absorber.
HINT: Fit the lower end of the coil spring into the gap of the spring lower seat.
e. Install the upper insulator and spring seat.
f.
Install the dust seal and suspension support.
g. Using SST # 09729 - 22031 or equivalent to hold the spring seat, install a new nut.
Torque: 47 Nm (34 ft. lbs.)
h. Rotate the spring seat so that the "OUT" mark of the spring seat toward the outside of the vehicle.
i.
Remove the SST # 09727 - 30021 or equivalent.
