toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

On-Vehicle Repair|Page 4431 > < On-Vehicle Repair
Page 2
background image

 

Remove the 4 bolts and oil strainer case. 
Torque: 10 N.m (7 ft. lbs.) 
Bolt length: 
-

Bolt A: 16 mm (0.63 in.) 

-

Bolt B: 20 mm (0.79 in.)  

-

Bolt C: 28 mm (1.10 in.) 

INSTALLATION HINT:  Replace the used gaskets with new ones.

4. Remove oil pipe.

Pry up pipe ends with a large screwdriver and remove the pipe.

5. Disconnect connectors from each solenoid valve.
6. Remove valve body.

 

a. Remove the 16 bolts. 

Torque: 10 N.m (7 ft. lbs.) 
Bolt length: 
-

Bolt A: 23 mm (0.91 in.)  

-

Bolt B: 32 mm (1.26 in.) 

On-Vehicle Repair|Page 4431 > < On-Vehicle Repair