Previa Van LE 4WD L4-2438cc 2.4L DOHC SC MFI (1997)
7. Remove bearing.
a. Using SST # 09527 - 30010 or equivalent and a press, remove the bearing.
b. Remove the bearing outer retainer.
8. Disc brake: Assemble bearing outer retainer and backing plate.
a. Place a new retainer gasket and bearing outer retainer on the backing plate.
b. Using a socket wrench and hammer, install the 4 bolts.
9. Install bearing.
a. Drum brake: Install the bearing outer retainer to the axle shaft.
b. Disc brake: Install the backing plate to the axle shaft.
c. Using SST #09506 - 30012 or equivalent and a press, install a new bearing.
10. Install bearing inner retainer.
a. Heat a new inner retainer to about 150° C (302° F) in an oil bath.
b. Using SST # 09506 - 30012 or equivalent and a press, install the retainer to the axle shaft with the inner retainer is still hot.
HINT:
^
Be sure that there is no oil or grease on the axle shaft or retainer.
^
Face the non - beveled side of the inner retainer toward the bearing.
