toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Fuel Pressure|Specifications|Page 1078 > < Fuel Pressure|Specifications|Page 1076
Page 3
background image

15. Reconnect the vacuum sensing hose to the union.

16. Measure the fuel pressure at idle.

Fuel pressure:  167 - 216 kPa (24 - 31 psi) 

If pressure is not as specified, check the vacuum sensing hose and fuel pressure regulator.

17. Stop the engine.
18. Check that the fuel pressure remains as specified for 5 minutes after the engine has stopped.

Fuel pressure:  147 kPa (21 psi) or more 

If pressure is not as specified, check the fuel pump, pressure regulator and/or injectors.

19. After checking fuel pressure, disconnect the negative (-) terminal cable from the battery. Carefully remove the SST to prevent gasoline from

splashing. SST 09268-45012

20. Reinstall the fuel inlet hose to the fuel filter with 2 new gaskets and the union bolt.

Torque:  29 Nm (22 ft lb) 

Fuel Pressure|Specifications|Page 1078 > < Fuel Pressure|Specifications|Page 1076