Prius L4-1.8L (2ZR-FXE) Hybrid (2010)
_hybrid/Page-2174003.png)
(1) Connect the Techstream to the DLC3.
(2) Turn the power switch on (IG).
(3) Turn the Techstream on.
(4) Enter the following menus: Body Electrical / Smart Key / Utility / Key Communication Check / Overhead + Front Room.
(5) When the electrical key transmitter is in the position shown in the illustration, check that the wireless door lock buzzer sounds.
HINT
*
Place the key on the driver or front passenger seat cushion.
*
If the buzzer sounds, it can be determined that the indoor electrical key oscillators are operating normally.
(b) Diagnostic mode inspection (indoor electrical key oscillator (for center floor))
(1) Connect the Techstream to the DLC3.
(2) Turn the power switch on (IG).
(3) Turn the Techstream on.
(4) Enter the following menus: Body Electrical / Smart Key / Utility / Key Communication Check / Overhead + Rear Room.
(5) When the electrical key transmitter is in the position shown in the illustration, check that the wireless door lock buzzer sounds.
HINT
*
Place the key on the rear seat cushion.
*
If the buzzer sounds, it can be determined that the indoor electrical key oscillators are operating normally.
(c) Diagnostic mode inspection (indoor electrical key oscillator (for rear floor))
(1) Connect the Techstream to the DLC3.
(2) Turn the power switch on (IG).
(3) Turn the Techstream on.
(4) Enter the following menus: Body Electrical / Smart Key / Utility / Key Communication Check / Overhead + Back Door (inside).
(5) When the electrical key transmitter is in the position shown in the illustration, check that the wireless door lock buzzer sounds.
HINT
*
Place the key on the luggage area.
*
If the buzzer sounds, it can be determined that the indoor electrical key oscillators are operating normally.
Result:
