Prius L4-1.8L (2ZR-FXE) Hybrid (2010)
HINT
If there was a communication problem in the past but the communications are working correctly now, it is possible that the source of
the problem was temporary radio interference, or the vehicle may have been outside the service area.
B -- END
A -- Continue to next step.
5. REPLACE DCM (TELEMATICS TRANSCEIVER)
(a) Replace the DCM (Telematics Transceiver) See: Service and Repair/Removal.
NOTICE:
*
The power switch must be off.
*
Do not swap the DCM (Telematics Transceiver) with one from another vehicle.
NEXT -- PERFORM DCM ACTIVATION See: Scan Tool Testing and Procedures/DCM Activation