Prius L4-1.8L (2ZR-FXE) Hybrid (2010)
_hybrid/Page-2456003.png)
4. Hold the T-anchor stud and unscrew the T-anchor. Remove and discard the T-anchor and stud.
5. Snap the lower quarter panel trim back into place. Ensure that the weather strip is properly installed behind the tail light assembly.
6. Select one of the cargo net hooks from the repair kit and insert the fastener (removed in step 1) through the hole of the hook. Ensure the hook is
located on the bottom of the opening and tighten with a screwdriver.
Do NOT overtighten the screw.
