toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Removal and Replacement|Page 7987 > < Removal and Replacement|Page 7985
Page 14
background image

50. REMOVE MAP LIGHT ASSEMBLY (w/ Sliding Roof)   See: Console/Console Lamp/Service and Repair/Removal

51. REMOVE NO. 1 ROOM LIGHT ASSEMBLY   See: Lighting and Horns/Dome Lamp/Service and Repair/Removal

52. REMOVE FRONT ASSIST GRIP ASSEMBLY

(a) Using a clip remover, disengage the 4 claws.

NOTICE:
Do not forcibly pry the assist grip covers to prevent them from being deformed.

HINT
*

Gently pry on the assist grip covers as shown in the illustration to remove them.

*

Tape the clip remover tip before use.

(b) Pull off the 2 assist grip covers by hand.

(c) Disengage the 2 clips and remove the front assist grip assembly.

(d) Remove the 2 clips from the vehicle body.

HINT
Use the same procedure for the other front assist grip.

53. REMOVE REAR ASSIST GRIP ASSEMBLY

(a) Using a clip remover, disengage the 4 claws.

NOTICE:
Do not forcibly pry the assist grip covers to prevent them from being deformed.

HINT
*

Gently pry on the assist grip covers as shown in the illustration to remove them.

Removal and Replacement|Page 7987 > < Removal and Replacement|Page 7985