Prius L4-1.8L (2ZR-FXE) Hybrid (2010)
Power Seat Switch: Service and Repair
Removal
SEAT: LUMBAR SWITCH: REMOVAL
1. REMOVE REAR NO. 2 FLOOR BOARD See: Interior Moulding / Trim/Headliner/Service and Repair/Removal and Replacement/Removal
2. REMOVE REAR DECK FLOOR BOX (for Separate Type) See: Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Removal
3. REMOVE REAR NO. 3 FLOOR BOARD See: Interior Moulding / Trim/Headliner/Service and Repair/Removal and Replacement/Removal
4. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning.
5. REMOVE FRONT SEAT HEADREST ASSEMBLY
(a) Press the headrest support button and pull up the headrest as shown in the illustration to remove it.
6. REMOVE OUTER SEAT TRACK COVER
(a) Lift up the seat track adjusting handle and move the seat to the foremost position.
(b) Disengage the 2 claws and remove the outer seat track cover.
7. REMOVE INNER SEAT TRACK COVER
(a) Disengage the claw.
(b) Separate the guide and remove the inner seat track cover.
8. REMOVE FRONT SEAT ASSEMBLY