Prius L4-1.8L (2ZR-FXE) Hybrid (2010)
Crankshaft Main Bearing Seal: Service and Repair
Installation
2ZR-FXE ENGINE MECHANICAL: REAR CRANKSHAFT OIL SEAL: INSTALLATION
1. INSTALL REAR ENGINE OIL SEAL
(a) Apply MP grease to the lip of a new oil seal.
NOTICE:
Keep the lip free from foreign matter.
(b) Using SST and a hammer, tap in the oil seal until its surface is flush with the rear oil seal retainer edge.
SST : 09223-15030
SST : 09950-70010
09951-07100
NOTICE:
*
Wipe any extra grease off the crankshaft.
*
Do not tap the oil seal at an angle.
2. INSTALL FLYWHEEL SUB-ASSEMBLY
(a) Using SST, hold the crankshaft.
SST : 09213-58014
91551-80840
SST : 09330-00021
(b) Apply adhesive to the 2 or 3 end threads of the bolts.