Prius L4-1.8L (2ZR-FXE) Hybrid (2010)
Adhesive:
Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent
(c) Using several steps, uniformly install and tighten the 8 bolts in the sequence shown in the illustration.
Torque : 49 Nm (500 kgf-cm, 36 ft-lbf)
(d) Mark the front of the bolts with paint.
(e) Retighten the 8 bolts 90° in the same sequence.
(f) Check that the paint marks are now at a 90° angle to the front.
(g) Check that the crankshaft turns smoothly.
3. INSTALL TRANSMISSION INPUT DAMPER ASSEMBLY
(a) Using SST, hold the crankshaft.
SST : 09213-58014
91551-80840
SST : 09330-00021
(b) Install the transmission input damper.
(c) In several steps, uniformly install and tighten the 6 bolts in the sequence shown in the illustration.
Torque : 30 Nm (306 kgf-cm, 22 ft-lbf)