Prius L4-1.8L (2ZR-FXE) Hybrid (2010)
NOTICE:
*
Be careful with the installation direction of the gaskets.
*
Do not reuse the gaskets.
*
Do not damage the gaskets.
*
Do not push in the gasket by using the exhaust pipe when connecting it.
(d) Connect the front exhaust pipe assembly to the 3 exhaust pipe supports.
(e) Install the front exhaust pipe assembly with the 4 bolts and 4 compression springs.
Torque : 43 Nm (440 kgf-cm, 32 ft-lbf)
9. ADD COOLANT (for Engine with Exhaust Heat Recirculation System) See: Cooling System/Coolant/Service and Repair/Coolant (For Engine)
10. INSPECT FOR COOLANT LEAK (for Engine with Exhaust Heat Recirculation System) See: Cooling System/Testing and
Inspection/Component Tests and General Diagnostics/Cooling System
11. INSTALL FRONT CENTER FLOOR BRACE See: Exhaust Pipe/Service and Repair/Installation
12. INSTALL FRONT NO. 3 ENGINE UNDER COVER See: Exhaust Pipe/Service and Repair/Installation
13. INSTALL NO. 2 ENGINE UNDER COVER
14. INSTALL NO. 1 ENGINE UNDER COVER
15. INSPECT FOR EXHAUST GAS LEAK