Prius L4-1.8L (2ZR-FXE) Hybrid (2010)
_hybrid/Page-1923006.png)
6. CONNECT NO. 5 INVERTER COOLING HOSE
(a) Using pliers, grip the claws of the clip and slide the clip to connect the No. 5 inverter cooling hose.
7. CONNECT AIR CONDITIONING TUBE AND ACCESSORY ASSEMBLY
(a) Remove the attached vinyl tape from the pipe and the connecting part of the cooler condenser assembly.
(b) Sufficiently apply compressor oil to a new O-ring and the fitting surface of the pipe joint.
Compressor oil:
ND-OIL 11 or equivalent
(c) Install the O-ring on the air conditioning tube and accessory assembly.
NOTICE:
*
Keep the O-ring and O-ring fitting surfaces clean from dirt or any foreign objects.
*
Do not use any compressor oil other than ND-OIL 11 or equivalent. If any compressor oil other than ND-OIL 11 or equivalent is
used, compressor motor insulation performance may decrease, resulting in a leakage of electric power.
(d) Install the air conditioning tube and accessory assembly on the cooler condenser assembly with the bolt.
Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)
8. CONNECT DISCHARGE HOSE SUB-ASSEMBLY
(a) Remove the attached vinyl tape from the hose and the connecting part of the cooler condenser assembly.
(b) Sufficiently apply compressor oil to a new O-ring and the fitting surface of the hose joint.
Compressor oil:
ND-OIL 11 or equivalent
(c) Install the O-ring on the discharge hose sub-assembly.
NOTICE:
*
Keep the O-ring and O-ring fitting surfaces clean from dirt or any foreign objects.
*
Do not use any compressor oil other than ND-OIL 11 or equivalent. If any compressor oil other than ND-OIL 11 or equivalent is
used, compressor motor insulation performance may decrease, resulting in a leakage of electric power.
(d) Install the discharge hose sub-assembly on the cooler condenser assembly with the bolt.