Prius L4-1.8L (2ZR-FXE) Hybrid (2010)
Refrigerant Pressure Sensor / Switch: Service and Repair
Removal
HEATING / AIR CONDITIONING: AIR CONDITIONING PRESSURE SENSOR: REMOVAL
1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM See: Service and Repair
2. REMOVE REAR NO. 2 FLOOR BOARD (for Separate Type) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Removal
3. REMOVE REAR DECK FLOOR BOX See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Removal
4. REMOVE REAR NO. 3 FLOOR BOARD See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Removal
5. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning.
6. REMOVE AIR CONDITIONING PRESSURE SENSOR
(a) Disconnect the connector.
(b) Remove the air conditioning pressure sensor.
NOTICE:
Do not deform the piping.