toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Electrical - HV And Auxiliary Battery Maintenance|Page 2408 > < Electrical - HV And Auxiliary Battery Maintenance|Page 2406
Page 5
background image

Before Inspection

1. Recharge Cable and Electrical Leakage Detection Unit

A. Cables other than those intended for exclusive use with this vehicle cannot be used for recharging.

CAUTION

^

Do not attempt to disassemble or repair the recharge cable, recharge connector, plug or electrical leakage unit.

^

Do not subject the electrical leakage detection unit to strong impacts.

^

Do not forcefully fold the recharge cable around or scratch it with sharp things.

^

Do not fold the recharge connector or plug around or insert foreign objects into them.

^

Hold the body of the recharge connector or plug when removing.

2. Power Sources

A.An external power source that meets the criteria listed below is necessary for recharging this vehicle.

CAUTION

^

Connect to an AC 120V receptacle (NEMA 5-15R) with a Ground-Fault Circuit- Interrupter (GFCI) and with an over current circuit breaker
in a panel board.

^

Do not connect the recharge cable to a multi-receptacle, adapter, multi-plugs or power strips.

^

Do not connect the recharge cable to an extension cable. The cable may overheat, or the leak detection function may not operate correctly.

Electrical - HV And Auxiliary Battery Maintenance|Page 2408 > < Electrical - HV And Auxiliary Battery Maintenance|Page 2406