Prius L4-1.8L (2ZR-FXE) Hybrid (2010)
12. INSTALL FRAME WIRE
CAUTION:
Wear insulating gloves.
(a) Install the frame wire on the hybrid battery junction block assembly with the 2 nuts.
Torque : 9.0 Nm (92 kgf-cm, 80 in-lbf)
NOTICE:
*
Make sure that the ends of the frame wire are not crossed over each other.
*
Be sure to connect the frame wires to the correct terminals.
(b) Connect the clamp and frame wire.
13. CHECK HIGH VOLTAGE CABLE CONNECTION CONDITION
CAUTION:
Wear insulated gloves and protective goggles.
(a) Check that each wire harness is being installed securely.
NOTICE:
*
Make sure that the end of the frame wire are not crossover each other.
*
Be sure to connect the frame wire to the correct terminals as shown in the illustration.
*
The connectors should be connected securely.
*
The nuts should be fastened securely.
*
Make sure that the 4 plastic covers are engaged securely.
14. INSTALL CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY LH
(a) Install the child restraint seat anchor bracket sub-assembly LH with the 2 bolts.