toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Electrical - HV And Auxiliary Battery Maintenance|Page 2424 > < Electrical - HV And Auxiliary Battery Maintenance|Page 2422
Page 6
background image

B. When recharging outdoors make sure to connect to a raintight receptacle type that is appropriate for outdoor use.

3. Usable Temperature Range

A. Do not recharge if the outside temperature is -22F (-33C) or below as it is likely that recharging will take longer and equipment related to

recharging will be damaged.

Inspection

1. Preparations for Recharge

A. The shift position is in "P".

B. The parking brake is applied.

C. The "POWER" switch is OFF.

D. Lights wipers the air conditioning system the audio system the seat heaters and all other features that use electricity are switched OFF.

2. Check Recharge Function

A. Check the condition of the recharge cable provided with the vehicle.

B. Insert the recharge cable into the receptacle of the external power source.

C. Check that the power light on the electrical leakage detection unit is illuminated.

If the power light does not illuminate, ensure that the plug is firmly connected with the receptacle.

D. Check Electrical leakage test function.

(1) Press the test button on the electrical leakage detection unit to check that the electrical leakage detection function operates properly. If the

error warning light illuminates when the test button is pressed the function is operating correctly.

(2) After the test has been completed press the reset button to extinguish the error warning light.

HINT

^

Recharging cannot be carried out while the error warning light is illuminated.

^

If the error warning light does not come on even if the test button is pressed, it is likely that the function is not operating correctly. Stop
recharging immediately and refer to the Repair Manual.

E. Press the recharge inlet door to open.

F. Move the knob and open the recharge inlet cap.

G. Insert the recharge cable into the recharge inlet.

HINT

^

When inserting, make sure not to press the lock release button.

^

Align with the guide position shown on the underside of the recharge connector, and push in until a click is heard.

CAUTION

^

Connect to a power source suitable for recharging.

^

Do not connect the plug if your hands are wet. Also, do not get the plug or receptacle wet.

^

^

Do not touch the electrical terminals of recharge connector or short it with foreign objects.

^

^

If the plug is dirty or dusty, clean it before inserting.

Electrical - HV And Auxiliary Battery Maintenance|Page 2424 > < Electrical - HV And Auxiliary Battery Maintenance|Page 2422