Prius L4-1.8L (2ZR-FXE) Hybrid (2010)
_hybrid/Page-885001.png)
System Main Relay, Hybrid Drive: Service and Repair
Removal
HYBRID / BATTERY CONTROL: HV RELAY ASSEMBLY: REMOVAL
1. REMOVE UPPER HYBRID BATTERY COVER SUB-ASSEMBLY
HINT
See: Battery System, Hybrid Drive/Battery, Hybrid Drive/Service and Repair/Removal.
2. DISCONNECT FRAME WIRE See: Battery System, Hybrid Drive/Battery, Hybrid Drive/Service and Repair/Removal
3. REMOVE HYBRID BATTERY JUNCTION BLOCK
CAUTION:
Be sure to wear insulated gloves.
NOTICE:
Insulate the removed terminals with insulating tape.
(a) Disconnect the 2 connectors from the hybrid battery junction block.
(b) Disconnect the 2 connectors from the hybrid battery junction block.
(c) Remove the 3 nuts and hybrid battery junction block.
