Prius L4-1.8L (2ZR-FXE) Hybrid (2010)
_hybrid/Page-2717001.png)
Fuel Gauge Sender: Service and Repair
Installation
2ZR-FXE FUEL: FUEL SENDER GAUGE ASSEMBLY: INSTALLATION
1. INSTALL FUEL SENDER GAUGE ASSEMBLY
(a) Install the fuel sender gauge assembly by sliding it downward.
(b) Connect the connector of the fuel sender gauge assembly.
(c) Install the 2 harness protectors.
NOTICE:
Do not damage the wire harness.
(d) Connect the 3 harness clamps.
2. INSTALL FUEL SUCTION TUBE ASSEMBLY WITH PUMP AND GAUGE
(a) Install the fuel suction tube assembly with pump and gauge See: Powertrain Management/Fuel Delivery and Air Induction/Fuel
Pump/Service and Repair/Removal and Replacement/Installation.
