Prius L4-1.8L (2ZR-FXE) Hybrid (2010)
13. REMOVE DECK TRIM SERVICE HOLE COVER See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Removal
14. REMOVE REAR DECK TRIM COVER See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Removal
15. REMOVE REAR SEAT CUSHION ASSEMBLY See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat
Assembly/Removal
16. REMOVE REAR SIDE SEATBACK ASSEMBLY LH (for LH Side) See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Rear Seat Assembly/Removal
17. REMOVE REAR SIDE SEATBACK ASSEMBLY RH (for RH Side)
HINT
Use the same procedure described for the LH side.
18. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY (for LH Side) See: Body and Frame/Interior Moulding / Trim/Headliner/Service
and Repair/Removal and Replacement/Removal
19. REMOVE TONNEAU COVER HOLDER CAP (for LH Side) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Removal
20. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH (for LH Side) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Removal
21. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY (for RH Side)
HINT
Use the same procedure described for the LH side.
22. REMOVE TONNEAU COVER HOLDER CAP (for RH Side)
HINT
Use the same procedure described for the LH side.
23. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH (for RH Side) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Removal
24. REMOVE REAR COMBINATION LIGHT ASSEMBLY
(a) Disconnect the connector.
(b) Remove the 2 nuts.
(c) Disengage the 2 clips and guide, and remove the rear combination light assembly as shown in the illustration.
Installation