Prius L4-1.8L (2ZR-FXE) Hybrid (2010)
_hybrid/Page-602006.png)
(4) Check for foreign matter on the seal surface of the disconnected pipe. Clean it if necessary.
(5) Cover the disconnected pipe and connector with a plastic bag to prevent damage and contamination.
(g) Perform the following procedure when connecting a fuel tube connector (quick type B):
(1) Line up the two parts of the pipes to be connected, and fully push the fuel tube connector and pipe together until they are fully seated.
Next, push the retainer into the connector until its claws lock. If the pipe is difficult to push into the connector, apply a small amount of
clean engine oil to the tip of the pipe and reinsert it.
(2) After connecting the pipes, check that the pipe and connector are securely connected by pulling on them.
(3) Inspect for fuel leaks See: Powertrain Management/Fuel Delivery and Air Induction/Testing and Inspection.
(h) Observe the following precautions when handling a nylon tube:
CAUTION:
*
Do not twist the connector part of the nylon tube or the quick connector when connecting them.
*
Do not bend or twist the nylon tube.
*
Do not remove the EPDM protector on the outside of the nylon tube.
*
Do not pinch or kink the nylon tubes to prevent fuel leakage.
4. INJECTOR
(a) Observe the following precautions when removing and installing a fuel injector:
