Prius L4-1.8L (2ZR-FXE) Hybrid (2010)
Tire Pressure Module: Service and Repair
Installation
TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING ECU: INSTALLATION
1. INSTALL TIRE PRESSURE WARNING ECU
(a) Engage the 2 claws to install the tire pressure warning ECU.
2. INSTALL ECU INTEGRATION BOX
HINT
Refer to the procedures from Install ECU Integration Box See: Power and Ground Distribution/Power Distribution Module/Service
and Repair/Installation.
3. REGISTER OF TRANSMITTER ID
(a) Register all transmitter IDs See: Testing and Inspection/Programming and Relearning/Registration.
4. PERFORM INITIALIZATION
(a) Perform initialization See: Testing and Inspection/Programming and Relearning/Initialization.
5. INSPECT TIRE PRESSURE WARNING SYSTEM
(a) Inspect the tire pressure warning system See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Test Mode Procedure.