Prius L4-1.8L (2ZR-FXE) Hybrid (2010)
Alarm Module: Service and Repair
Installation
THEFT DETERRENT / KEYLESS ENTRY: CERTIFICATION ECU: INSTALLATION
1. INSTALL CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)
(a) Engage the 2 craws and install the certification ECU (smart key ECU assembly).
2. INSTALL ECU INTEGRATION BOX RH See: Relays and Modules - Power and Ground Distribution/Power Distribution Module/Service and
Repair/Installation
3. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Lower Instrument Panel/Installation
4. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal and Replacement/Lower Instrument Panel/Installation
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning.
6. INSTALL REAR NO. 3 FLOOR BOARD See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation
7. INSTALL REAR DECK FLOOR BOX See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation
8. INSTALL REAR NO. 2 FLOOR BOARD (for Separate Type) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Installation
9. REGISTER KEY
NOTICE:
If the certification ECU (smart key ECU assembly) is replaced, register the key See: Accessories and Optional Equipment/Antitheft
and Alarm Systems/Testing and Inspection/Programming and Relearning/Engine Immobiliser System.