toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Front Seat Side Airbag Assembly|Page 6644 > < Front Seat Side Airbag Assembly|Page 6642
Page 5
background image

Minimum tire size:

Must exceed the following dimensions

Width:

185 mm (7.28 in.)

Inner diameter:

360 mm (1.18 ft.)

CAUTION:
*

Make sure that the wires are tight. If there is slack in the wires, the front seat side airbag assembly may break loose when the
airbag is deployed.

*

Face the front seat side airbag assembly deployment surface toward the inside the tire to evenly distribute the force of deployment.

NOTICE:
The tire may be marked by the airbag deployment, so use an unneeded tire.

(d) Install SST.

(1) Connect the SST connector to the front seat side airbag assembly connector.

SST : 09082-00820

(e) Place the tires.

(1) Place at least 2 tires under the tire to which the front seat side airbag assembly is tied.

(2) Place at least 2 tires onto the tire to which the front seat side airbag assembly is tied. The top tire should have a wheel installed.

NOTICE:
Do not place the SST connector under the tire because it could be damaged.

(3) Tie the tires together with the 2 wires.

CAUTION:
Make sure that the wires are tight. Looseness in the wires results in the tires breaking loose when the airbag is deployed.

Front Seat Side Airbag Assembly|Page 6644 > < Front Seat Side Airbag Assembly|Page 6642