Prius L4-1.8L (2ZR-FXE) Hybrid (2010)
(c) Using a screwdriver with the tip wrapped with protective tape, release the airbag connector lock and disconnect the curtain shield airbag
connector.
NOTICE:
When disconnecting any airbag connector, take care not to damage the airbag wire harness.
(d) Remove the 5 bolts.
(e) Remove the 4 clips.
(1) Using a clip remover, remove the 4 pins.
(2) Using a screwdriver with the tip wrapped with protective tape, separate the 4 clips and curtain shield airbag assembly from the body as
shown in the illustration.