toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Front Seat Side Airbag Assembly|Page 6653 > < Front Seat Side Airbag Assembly|Page 6651
Page 8
background image

(1) Position the curtain shield airbag assembly inside the tire as shown in the illustration.

Minimum tire size:

Must exceed the following dimensions

Width:

185 mm (7.28 in.)

Inner diameter:

360 mm (1.18 ft.)

CAUTION:
Make sure that the wires are tight. If there is slack in the wires, the curtain shield airbag assembly may break loose when the airbag is
deployed.

NOTICE:
The tire may be marked by the airbag deployment, so use an unneeded tire.

(e) Install SST.

(1) After connecting the following SST to each other, connect them to the curtain shield airbag assembly.

SST : 09082-00802

09082-10801

09082-20801

(f) Place the tires.

CAUTION:
Do not face the deployment side of the curtain shield airbag assembly toward the ground.

(1) Place at least 2 tires under the tire to which the curtain shield airbag assembly is tied.

(2) Place at least 2 tires onto the tire to which the curtain shield airbag assembly is tied. The top tire should have a wheel installed.

NOTICE:

Front Seat Side Airbag Assembly|Page 6653 > < Front Seat Side Airbag Assembly|Page 6651