toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Front Seat Side Airbag Assembly|Page 6677 > < Front Seat Side Airbag Assembly|Page 6675
Page 7
background image

(2) Disengage the 4 claws to remove the lower steering column cover.

(d) Disconnect the cable from the negative (-) battery terminal.

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

(e) Disconnect the yellow airbag connector from the spiral cable.

(1) Slide the slider to release the lock, and then disconnect the connector.

NOTICE:
When disconnecting any airbag connector, take care not to damage the airbag wire harness.

(f) Install SST.

CAUTION:
Check that there is no looseness in the steering wheel assembly and steering pad.

(1) Connect the SST connector to the airbag connector of the spiral cable.

SST : 09082-00700

Front Seat Side Airbag Assembly|Page 6677 > < Front Seat Side Airbag Assembly|Page 6675