Prius L4-1.8L (2ZR-FXE) Hybrid (2010)
(b) Disengage the guide and remove the front shoulder belt anchor adjuster assembly.
Installation
SEAT BELT: FRONT SEAT OUTER BELT ASSEMBLY: INSTALLATION
1. INSTALL FRONT SHOULDER BELT ANCHOR ADJUSTER ASSEMBLY
(a) Engage the guide to temporarily install the front shoulder belt anchor adjuster assembly with the 2 bolts.
(b) Fully tighten the bolt [A] first, then the bolt [B] to install the front shoulder belt anchor adjuster assembly.
Torque : 42 Nm (428 kgf-cm, 31 ft-lbf)
2. INSTALL FRONT SEAT OUTER BELT ASSEMBLY
(a) Temporarily install the front seat outer belt assembly with the 2 bolts.
(b) Fully tighten the bolt [A] first, then the bolt [B] to install the front seat outer belt assembly.
Bolt [A] - Torque : 7.5 Nm (77 kgf-cm, 66 in-lbf)
Bolt [B] - Torque : 42 Nm (428 kgf-cm, 31 ft-lbf)
(c) Connect the connector and lock the locking button as shown in the illustration.
NOTICE:
Securely lock the locking button.
(d) Connect each connector.
(e) Connect the shoulder anchor of the front seat outer belt assembly with the nut.