Prius L4-1.8L (2ZR-FXE) Hybrid (2010)
Seat Position Sensor: Service and Repair
Removal
SUPPLEMENTAL RESTRAINT SYSTEMS: SEAT POSITION SENSOR: REMOVAL
1. REMOVE FRONT SEAT ASSEMBLY LH
HINT
Refer to the procedure up to Remove Front Seat Assembly LH See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Front Seat Assembly/Removal.
2. REMOVE RECLINING ADJUSTER RELEASE HANDLE LH See: Body and Frame/Seats/Service and Repair/Overhaul/Front Seat
Assembly/Disassembly
3. REMOVE VERTICAL ADJUSTING HANDLE LH (w/ Vertical Adjuster) See: Body and Frame/Seats/Service and Repair/Overhaul/Front Seat
Assembly/Disassembly
4. REMOVE FRONT SEAT CUSHION SHIELD ASSEMBLY LH See: Body and Frame/Seats/Service and Repair/Overhaul/Front Seat
Assembly/Disassembly
5. REMOVE SEAT POSITION SENSOR
(a) Disconnect the connector.
(b) Separate the wire harness from the seat slide position sensor protector.
(c) Using a T30 "TORX" socket wrench, remove the "TORX" screw and seat position sensor with the seat slide position sensor protector.
(d) Remove the seat position sensor from the seat slide position sensor protector as shown in the illustration.