Prius L4-1.8L (2ZR-FXE) Hybrid (2010)
Hybrid Battery Service Switch: Service and Repair
Installation
HYBRID / BATTERY CONTROL: SERVICE PLUG GRIP: INSTALLATION
1. INSTALL SERVICE PLUG GRIP
CAUTION:
Wear insulating gloves.
NOTICE:
Before connecting the service plug, check that no parts and tools remain and that the high voltage terminals and connectors are
connected securely.
(a) Wear insulated gloves and install the service plug grip in the order shown in the illustration.
(b) Rotate the handle of the service plug grip 90° toward the battery and slide it in the direction shown by the arrow until a click sound is heard.
2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning.
3. INSTALL REAR NO. 3 FLOOR BOARD See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation
4. INSTALL REAR DECK FLOOR BOX See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation
5. INSTALL REAR NO. 2 FLOOR BOARD (for Separate Type) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Installation