Prius L4-1.8L (2ZR-FXE) Hybrid (2010)
Installation
LIGHTING (INT): REAR DOOR COURTESY SWITCH: INSTALLATION
1. INSTALL REAR DOOR COURTESY LIGHT SWITCH ASSEMBLY
(a) Using a T30 "TORX" socket wrench, install the rear door courtesy light switch assembly with the bolt.
Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)
(b) Connect the connector.
2. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH (for LH Side) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Installation
3. INSTALL TONNEAU COVER HOLDER CAP (for LH Side) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Installation
4. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY (for LH Side) See: Body and Frame/Interior Moulding / Trim/Headliner/Service
and Repair/Removal and Replacement/Installation
5. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH (for RH Side) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Installation
6. INSTALL TONNEAU COVER HOLDER CAP (for RH Side)
HINT
Use the same procedure described for the LH side.
7. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY (for RH Side)
HINT
Use the same procedure described for the LH side.
8. INSTALL REAR SIDE SEATBACK ASSEMBLY LH (for LH Side) See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Rear Seat Assembly/Installation
9. INSTALL REAR SIDE SEATBACK ASSEMBLY RH (for RH Side)
HINT
Use the same procedure described for the LH side.
10. INSTALL REAR SEAT CUSHION ASSEMBLY See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat
Assembly/Installation
11. INSTALL REAR DECK TRIM COVER See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation
12. INSTALL DECK TRIM SERVICE HOLE COVER See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation
13. INSTALL REAR NO. 1 FLOOR BOARD See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation