Prius L4-1.8L (2ZR-FXE) Hybrid (2010)
_hybrid/Page-595001.png)
Wiper Switch: Service and Repair
Installation
WIPER / WASHER: WIPER SWITCH: INSTALLATION
1. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY
(a) Engage the claw and install the windshield wiper switch assembly as shown in the illustration.
(b) Connect the 2 connectors.
2. INSTALL UPPER STEERING COLUMN COVER
(a) Engage the claw and 2 pins to install the upper steering column cover.
3. INSTALL LOWER STEERING COLUMN COVER
NOTICE:
If the lower steering column cover is installed in the incorrect order, it will not be possible to assemble the lower steering column
cover.
(a) Engage the 2 claws to install the lower steering column cover.
(b) Engage the 4 claws.
(c) Engage the claw.
