Prius L4-1.8L (2ZR-FXE) Hybrid (2010)
_hybrid/Page-1617001.png)
Ignition Switch: Testing and Inspection
2ZR-FXE STARTING: POWER SWITCH: INSPECTION
1. INSPECT POWER SWITCH
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
(b) If the result is not as specified, replace the power switch.
(c) Apply battery voltage between the terminals of the switch, and check the illumination condition of the power switch.
Standard Resistance:
(d) If the result is not as specified, replace the power switch.
