Prius L4-1.8L (2ZR-FXE) Hybrid (2010)
Front Cross-Member: Service and Repair
Removal
FRONT SUSPENSION: FRONT SUSPENSION MEMBER: REMOVAL
1. PLACE FRONT WHEELS FACING STRAIGHT AHEAD
2. SECURE STEERING WHEEL See: Steering/Steering Gear/Service and Repair/Removal and Replacement/Removal
3. REMOVE COLUMN HOLE COVER SILENCER SHEET See: Steering/Steering Column/Service and Repair/Removal
4. SEPARATE NO. 2 STEERING INTERMEDIATE SHAFT ASSEMBLY See: Steering/Steering Column/Service and Repair/Removal
5. SEPARATE NO. 1 STEERING COLUMN HOLE COVER SUB-ASSEMBLY See: Steering/Steering Gear/Service and Repair/Removal and
Replacement/Removal
6. REMOVE FRONT WHEELS
7. REMOVE NO. 1 ENGINE UNDER COVER
8. REMOVE NO. 2 ENGINE UNDER COVER
9. REMOVE FRONT NO. 3 ENGINE UNDER COVER
10. REMOVE REAR ENGINE UNDER COVER LH
11. REMOVE REAR ENGINE UNDER COVER RH
12. REMOVE FRONT SPOILER COVER (w/ Front Spoiler)
13. REMOVE ENGINE UNDER COVER (w/ Cover)
14. SEPARATE FRONT STABILIZER LINK ASSEMBLY LH
(a) Remove the nut and separate the stabilizer link assembly LH from the front stabilizer bar.
HINT
If the ball joint turns together with the nut, use a hexagon wrench (6 mm) to hold the stud bolt.
15. SEPARATE FRONT STABILIZER LINK ASSEMBLY RH
HINT
Perform the same procedure as for the LH side.
16. SEPARATE TIE ROD END SUB-ASSEMBLY LH See: Steering/Steering Gear/Service and Repair/Removal and Replacement/Removal
17. SEPARATE TIE ROD END SUB-ASSEMBLY RH
HINT
Perform the same procedure as for the LH side.
18. SEPARATE FRONT NO. 1 LOWER SUSPENSION ARM SUB-ASSEMBLY LH See: Wheel Hub/Service and Repair/Front Axle
Hub/Removal
19. SEPARATE FRONT NO. 1 LOWER SUSPENSION ARM SUB-ASSEMBLY RH
HINT
Perform the same procedure as for the LH side.