Prius Hybrid (2010) | Steering & Suspension | Wheels & Tires | TPMS | Service & Repair
Tire Pressure Monitor Receiver / Transponder: Service and Repair
Removal
TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING RECEIVER: REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning.
2. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY LH
HINT
*
Refer to the procedures up to Remove Roof Side Inner Garnish Assembly See: Restraint Systems/Seat Belt Systems/Seat
Belt/Service and Repair/Rear Seat Outer Belt Assembly/Removal.
*
Removal should be performed only for the left side.
3. REMOVE TIRE PRESSURE WARNING RECEIVER
(a) Remove the bolt.
(b) Disconnect the connector to remove the tire pressure warning receiver.