Prius L4-1.8L (2ZR-FXE) Hybrid (2010)
Shift Selector Actuator: Service and Repair
Installation
P410 HYBRID TRANSMISSION / TRANSAXLE: SHIFT CONTROL ACTUATOR: INSTALLATION
1. INSTALL SHIFT CONTROL ACTUATOR ASSEMBLY
(a) Install the shift control actuator assembly with the 3 new shift control actuator bolts.
Torque : 9.5 Nm (97 kgf-cm, 84 in-lbf)
(b) Install the 3 new shift control actuator bolt caps to the shift control actuator bolts.
NOTICE:
Push in each shift control actuator cap firmly until the claw of the shift control actuator bolt cap engages with the control actuator
bolt.
(c) Connect the connector to the shift control actuator assembly.
2. INSTALL NO. 1 ENGINE UNDER COVER